 |
MCB: |
As mentioned, in the working of Shock-guard when any of the
function takes place MCB turns off and supply get cut off, to restart
the supply MCB needs to be scratched on. |
|
|
MA SET: |
MA SET NOBE is known as "LEAKING SALTING NOBE" It can be set
between 1 MA to 30 MA after the fixation of shock-guard of the
system trips down at the MA Set 0, It is an indication of power
leakage. At this point setting can be done with the help of "MA SET
NOBE" |
|
|
BY PASS/ON SWITCH: |
In case of emergency Shock-guard can be turned to "BY PASS MODE"
In By Pass condition only MCB will work that means, it there is Short
circuit, High voltage or Earth fault then Shock-guard want cut off
the supply |
|
|
TEST BUTTON: |
After fixation of Shock-guard is completed and in order to check,
that whether the system is working or not, it can be checked by
pressing "TEST BUTTON" and if MCB turns off then Shock-guard dose
not turns off then, system is to be checked |
|
|
SIREN FACILITY: |
Shock-guard avails you with the "SIREN FACILITY". When shock
guard cuts off the power supply, Siren starts ringing, which
Indicates that any how MCB of Shock-guard has got off. if siren will
not be switched off manually then it will get switched off. this is
due timer facility in siren provided |
|
|
IN-PUT: |
The electric supply which enters in main switch from meter Board
that Power should be taken as "INPUT" |
|
|
OUT-PUT: |
The Supply of electric load which is to be covered by Shock-guard,
should be given Output supply from shock-guard |
|
